Posts: 23,841
Threads: 2
Joined: Sep 2003
Location: Missouri
Posts: 17,237
Threads: 0
Joined: Jul 2006
Location: Milwaukee area
Also the glass shelf brackets mounted to the wall. Looks real fun getting that installed.
Posts: 7,421
Threads: 1
Joined: Sep 2005
01-18-2018, 01:35 PM
(This post was last modified: 01-18-2018, 01:36 PM by Cooler.)
(01-16-2018, 06:29 PM)Phil Thien Wrote: Also the glass shelf brackets mounted to the wall. Looks real fun getting that installed.
I've used that hardware and it works remarkably well.
You mount two screws into the wall and then a small screw at the bottom clamps onto the shelf. These shelves are mounted on the vanity and supported outboard with the brackets. It should be strong enough.
The piece at the left is the top and it gets screwed into the wall. The piece on the right is the bottom and it gets screwed into the top piece. Your screwdriver is going to be very close to the wall for this, but mine worked fine.
No animals were injured or killed in the production of this post.