Wood Gloat
#7
I know, no pics....

My daughter had a birthday party at a recycle/reuse place yesterday.  I was wandering and found their wood section.  I didn't have time to pick through all of it, but managed to snag a 7x7 8/4 block of what I think is maple, a 12x12 8/4 block of walnut and a 2"x2"x~30" block of walnut.  12 bucks for all of it.    I'll be going back for more when I have more time.  They also have some thinner stock that would be great for laminations and segmenting.
Reply
#8
(02-26-2018, 11:24 AM)crokett™ Wrote: I know, no pics....

My daughter had a birthday party at a recycle/reuse place yesterday.  I was wandering and found their wood section.  I didn't have time to pick through all of it, but managed to snag a 7x7 8/4 block of what I think is maple, a 12x12 8/4 block of walnut and a 2"x2"x~30" block of walnut.  12 bucks for all of it.    I'll be going back for more when I have more time.  They also have some thinner stock that would be great for laminations and segmenting.

Congrats and Load up while you can since we can not ever have enough wood in the pile.
Yes
Winkgrin
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification.  Thank You Everyone.

It is always the right time, to do the right thing.
Reply
#9
(02-26-2018, 11:24 AM)crokett™ Wrote: I know, no pics....




   





Winkgrin
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#10
Nice find.  Was this reclaimed from a building demo or remodel?  I may have to check our salvage place if that's the case.
Reply
#11
I don't think so. It looked like offcuts from somewhere or blocks you could find at a woodworking store. The large blocks aren't surfaced. The thinner stuff is odd shapes and sizes and is most likely waste from some manufacturing or something.
Reply
#12
Nice find!

I would check it with a metal detector to be safe
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.