Posts: 175
Threads: 0
Joined: Mar 2003
I am replacing the clogged corrugated waste pipes from the gutter down spouts. I know there needs to be a slope (1/4 per foot). herein is my problem. The pipe initially goes straight down, then needs to make a 90 degree turn. How does one get to a proper slope when the first connection is 90 degrees? I am using a Wye with a cleanout and really do not want it tilted. The first horizontal leg is about 5 feet before it changes direction.
Posts: 22,488
Threads: 0
Joined: Feb 2005
Location: Regina Saskatchewan Canada
Normally there is enough deflection in the fitting/pipe connection to allow you to establish grade.
Blackhat
Bad experiences come from poor decisions. So do good stories.
Posts: 36,353
Threads: 3
Joined: Nov 2004
Location: RTP, NC
(07-16-2018, 02:00 PM)blackhat Wrote: Normally there is enough deflection in the fitting/pipe connection to allow you to establish grade.
This. Dig out behind the pipe that goes straight down so it can deflect slightly in the direction it needs to go. Hook up the new pipe, establish grade and backfill that, then backfill around the vertical piece. the horizontal run will also deflect some.
Posts: 1,920
Threads: 1
Joined: Aug 2016
(07-16-2018, 02:00 PM)blackhat Wrote: Normally there is enough deflection in the fitting/pipe connection to allow you to establish grade.
Agreed ,1/4" per foot slope is just a little over 1 degree . Should not be a issue. Roly
Posts: 175
Threads: 0
Joined: Mar 2003
Thanks all. I tend to over think things.
Posts: 4,769
Threads: 0
Joined: May 2010
If they are from the gutter downspouts they really don't need much slope
Posts: 883
Threads: 0
Joined: Sep 2009
Location: Carlisle, PA
07-16-2018, 06:39 PM
(This post was last modified: 07-16-2018, 06:40 PM by cams2705.)
(07-16-2018, 01:25 PM)wannabedivin Wrote: I am replacing the clogged corrugated waste pipes from the gutter down spouts. I know there needs to be a slope (1/4 per foot). herein is my problem. The pipe initially goes straight down, then needs to make a 90 degree turn. How does one get to a proper slope when the first connection is 90 degrees? I am using a Wye with a cleanout and really do not want it tilted. The first horizontal leg is about 5 feet before it changes direction.
The landscaper I used had the one younger kid put his foot on the end of the PVC pipe where it daylighted at the end of the trench while he used the small tractor to backfill. I PVC was flexible enough to give provide the required slope.