Shop Clean Up - Lee Valley, Leigh, Rockler, Misc - Bit of everything
#7
For Sale. A smorgasbord of items collected throughout the years that are just collecting dust and need to be sent to new homes.  In many cases the items are brand new in box. Either gifts from family or items I picked up with the intent to use and never have. In all cases, items are well cared for.  All items below are not including shipping, additional insurance, or transaction fees.  For ease, unless they don’t fit or requested, items will likely ship via USPS – most likely a flat rate box. Will try to ship cheaper. Please PM and include your paypal address as I will send a payment request. If you prefer to send a money order, no problem let me know. Let me know of any questions. I tried to price things reasonably around 70% of new or lower.  I included links for full item descriptions. If any prices are out of line let me know and/or make an offer. Everything has got to go. I know in some cases, the smalls make sense only when combined with several other items. All items will go to the first person to state unequivocally “I’ll Take It”.  If you need to see additional pictures, let me know. Note that I do not work from home so it will take me at least until the evening. I will do my best to ship the next day, but with a few little one running around it may take me a few days and am likely to ship like Tues/Thurs or Wed/Fri.
 
Miller Dowel 2x Birch - $20 – brand new in box
https://www.amazon.com/Miller-Dowels-2X-...B000HDE894
 
SoldPP-Rockler Flip Stop Fence – Have 2. $7 each – brand new in box
http://www.rockler.com/rockler-2-1-4-fence-flip-stop
 
SoldPP-Raised Panel Feather Board - $7 – brand new in box
https://www.woodline.com/products/raised...atherboard
 
SoldPP-Dowl-it 2500 Doweling Jig - $35 – brand new in box
https://www.dowl-it.com/8
 
Veritas Mini Edge Plane – $30 – brand new in box
http://www.leevalley.com/us/wood/page.as...1182,66567
 
SoldPP-Veritas Mini Block Plane - $30 – brand new in box
http://www.leevalley.com/us/gifts/page.a...3212,70138
 
SoldPP-Veritas Mini Shoulder Plane - $30 – brand new in box
http://www.leevalley.com/us/wood/page.aspx?p=64300
 
Veritas Block Plane Blade – 25deg A2, brand new in box. $20
http://www.leevalley.com/us/wood/page.as...5204,47881
 
3-in-1 brass marking gauge. $20 – gently used – still has all extra cutters and pins
http://www.leevalley.com/us/wood/page.as...2936,50440
 
Side clamp 'Eclipse' style honing guide - $10 – packaging is a little beat up. Can’t recall if I used this or not
http://www.toolsfromjapan.com/store/inde...ts_id=2121
 
SoldPP-Delta 34-182 tenoning jig - $60 – great shape, a little dusty but excellent condition. With original instructions
 
Newer style Stanley Standard Angle Block - $25. Made in England. Comes sharp and flat. Great beginner plane.
http://www.leevalley.com/us/wood/page.as...1189,41228
 
Starrett #243. $10. A minimal amount of surface rust here and there.
 
SoldPP-Rockler Router Table Fence - $40 – Brand new. box was opened to make sure it was intact.
http://www.rockler.com/rockler-router-ta...-and-guard
 
SoldPP-Stanley Router Plane No 71 – $40 – comes with ½” cutter and front depth gauge. Missing depth gauge screw and foot.
 
SoldPP-Narex bench chisels – have 6mm, 12mm, 20mm, and 26mm. ¼, ½, ¾, and 1” equivalents. Backs are flat and ready to go. Some have some use. Good set of chisels, were just replaced with LN’s. I’ll take $9 ea or $30/set. Older style with the thicker lands.
http://www.leevalley.com/us/wood/page.as...at=1,41504
 
Oneway termite handle only. Somewhere I lost the end bits. Probably good if you have the system and want a handle to stop swapping end bits. $25.
https://www.hartvilletool.com/product/1315/hollowing
 
SoldPP-90 degree mini t-track - $10 – 48” long, brand new in box
https://www.woodline.com/products/90-mini-t-track
 
SoldPP-Rockler Thin Rip Jig. $22. Used but like new.
http://www.rockler.com/thin-rip-tablesaw-jig
 
SoldPP-Starrett Measure Stix 4ft – pair of right to left and left to right - $5 pair – brand new – packages a bit beat up
https://www.amazon.com/dp/B0025Q0KAC
 
Stay Put Dust Collection Hose. $10. 2.5” hose – 3ft – with connectors. Item#501. Brand New
https://www.ptreeusa.com/dust_hose.html
 
Twelve foot CenterPoint Bench Tape - $7. Brand New
https://www.amazon.com/US-Tape-Centerpoi...B000N5UGQ0
 
Tapered plane iron with chip breaker. $15. Says R.B. Mitchell. Cast Steel Warranted. Pulled from a coffin smoother that was cracked along its length. Iron is 7” long, 2” wide tapering to 1.75” and almost ¼” thick.
 
SoldPP-Leigh D4 dovetail jig. $175. I went through the parts list and ordered anything missing. Complete except for VHS tape and bits which have been replaced by YouTube and used up, respectively.
 
Box of 4” dust collector fittings. Several blast gates, T’s, and elbows. Let me know if interested and I will take inventory. Might be prohibitive to ship.

Ridgid collared screw gun. ZRR6791. $50. Bought as a recon and used one project. Works as advertised.
Reply
#8
Attempting to post pics


Attached Files Image(s)
   
   
Reply
#9
More pics hopefully


Attached Files Image(s)
   
   
   
   
   
Reply
#10
Updated claimed items
Reply
#11
Pm sent for: Raised panel featherboard, 90° mini t-track, thin rip jig
Alex
Final Assembly Quality Inspector for the manufacture of custom vintage sport biplanes
[Image: 07-15-28-122_512.gif]
Reply
#12
PM sent for Dowl-It...
Eric
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.