That time again..
#21
  Re: That time again.. by bandit571 (The dreaded time bet...)
Decided that 1), I needed to find out about how this new computer does pictures, and 2) needed to resaw some scraps to build a box or three..

had  to  find a way to resize what pictures I took....might have it almost figured out... Rolleyes 
   
Set up the rip fence,,,had to run each board through, flip end for end, and run it back through...then use the bandsaw to cut a thin web between the two pieces
   
Part of the shop clean up, was to clean up the Stanley 45...oil the moving parts, and stash back in the case.. Cool
   
Screwdrivers?  yep, have a few that will work with this plane.. Winkgrin 
   
Little "Chef's hat" is a Goodell-Pratt, and is a perfect fit for the spur bolts....round handle is from Millers Falls.   The little square one also works with the spur bolts.....Not a lot of room for the bigger screwdriver.

Will need to flatten the parts, and see about building  box...or two...

Stay tuned.. Winkgrin
Show me a picture, I'll build a project from that
Reply
#22
  Re: That time again.. by bandit571 (The dreaded time bet...)
Cleaning the shop always yields little surprises. Whether it be finding something thought to be lost, or discovering a space that can be better utilized....


Looking forward to watching the poker table build, Steve! Winkgrin

Dave
"One should respect public opinion insofar as is necessary to avoid starvation and keep out of prison, but anything that goes beyond this is voluntary submission to an unnecessary tyrany, and is likely to interfere with happiness in all kinds of ways."
Reply
#23
  Re: That time again.. by bandit571 (The dreaded time bet...)
Yours pictures are looking better. You change camera's also?
Steve





*





Reply
#24
  Re: That time again.. by bandit571 (The dreaded time bet...)
Bandit just got back home....Gall Bladder surgery ( 4 hours!) with a robot....took a long time to get it all  out....going to take a few weeks to even try the shop.

Same old camera....
Show me a picture, I'll build a project from that
Reply
#25
  Re: RE: That time again.. by bandit571 (Bandit just got back...)
(02-07-2019, 02:26 PM)bandit571 Wrote: Bandit just got back home....Gall Bladder surgery ( 4 hours!) with a robot....took a long time to get it all  out....going to take a few weeks to even try the shop.

Same old camera....

Goodness. Hard to believe they release everyone so early anymore.
Steve





*





Reply
#26
  Re: That time again.. by bandit571 (The dreaded time bet...)
ER Sunday night, surgery Tuesday afternoon....got home today, just after Lunch....been a LONG, lost week.... No
Show me a picture, I'll build a project from that
Reply
#27
  Re: That time again.. by bandit571 (The dreaded time bet...)
Hope you're feeling better soon.
Reply
#28
  Re: That time again.. by bandit571 (The dreaded time bet...)
Hang in there and get well.  You are, by far, our most productive WoodNet poster so we are all pulling for you!
"I tried being reasonable..........I didn't like it." Clint Eastwood
Reply
#29
  Re: That time again.. by bandit571 (The dreaded time bet...)
Thoroughly enjoyable to see tools being used! Hope you're feeling better.
Waiting to grow up beyond being just a member
http://www.metaltech-pm.com
Reply
#30
  Re: RE: That time again.. by Bill Holt (Hang in there and ge...)
(02-07-2019, 09:15 PM)Bill Holt Wrote: Hang in there and get well.  You are, by far, our most productive WoodNet poster so we are all pulling for you!

Hey Bandit;

We all are pulling for you, we're ready for you to post again... and appreciate you letting us in on your plans for the next project in your "other" thread....

Hang in there is right!
Skip


Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)