Grease for angle grinder
#6
What grease would you recommend for an older Craftsman angle grinder. I have recently acquired a grinder with #1 Lithium Base Grease recommended. I have not located a product described in this manner. Any suggestion as to the best grease to use for this application?
Reply
#7
NLGI grades we use are normally from 1 to #6. #1 being soft and #6 being almost solid. Grades 0000 or 00 are near liquid.

The #1 or #2 would also be fine. The NLGI  grade should be on the container.

Here's an outstanding grease; https://www.grainger.com/product/MOBIL-M...reme-2RV29
Reply
#8
(06-29-2019, 05:06 PM)daddo Wrote: NLGI grades we use are normally from 1 to #6. #1 being soft and #6 being almost solid. Grades 0000 or 00 are near liquid.

The #1 or #2 would also be fine. The NLGI  grade should be on the container.

Here's an outstanding grease; https://www.grainger.com/product/MOBIL-M...reme-2RV29
Reply
#9
Woops, Was wanting to thank you, Daddo!
Reply
#10
Tube of white lithium, available at most parts stores.
Steve

Missouri






 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.