Posts: 98
Threads: 0
Joined: Feb 2019
Does anyone have experience with one of these old scroll saws? This is a Boice Crane from 1960 or so; I cannot seem to find a source for blades??
[attachment=20618]
Now where is that chisel
Posts: 14,692
Threads: 0
Joined: Sep 2004
Location: Butler, PA
(09-17-2019, 12:52 PM)Smashedfinger Wrote: Does anyone have experience with one of these old scroll saws? This is a Boice Crane from 1960 or so; I cannot seem to find a source for blades??
I don't know what blade that saw takes, but if anyone does, it is probably Rick Hutcheson.
Here's his website, which shows an e-mail address. Perhaps you can reach out to him and ask if he knows of any sources.
https://www.scrollsaws.com/
If you are going down a river at 2 mph and your canoe loses a wheel, how much pancake mix would you need to shingle your roof?
Posts: 2,682
Threads: 0
Joined: Mar 2000
Location: Portsmouth, VA
Have you looked over on OWWM ? If you havent joined that board you should, TONS of useful info and folks that are happy to help.