Bar top finishes
I have a natural edge cedar board (from an old bar top). I need to remove the epoxy bar top finish down to bare wood. Sanding would be way to much labor time. Do y’all think I could plane it off without messing blades up? Also, I understand there are epoxy bar top finishes that dry with a harder finish than others. The only finish I have used is Famowood. I don’t know alot about these finishes but the famowood seemed a bit soft after curing. Anyway any thoughts or advice would be appreciated.
  Re: Bar top finishes by bilbul (I have a natural edg...)
I googled "how to remove epoxy bar top"

There is plenty of information there.  This wikihow entry gives one method
No animals were injured or killed in the production of this post.

Forum Jump:

Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.