Jet Planer questions
#13
  Re: RE: Jet Planer questions by measure once cut remeasure (My current planer ha...)
(04-06-2020, 09:57 PM)measure once cut remeasure Wrote: My current planer has a handle lock.  My prior planer's handwheel would move a little if the knob side of the wheel was anywhere except bottom dead center.  I had a bungie cord attached to a ceiling joist above the handwheel. I would plane in 1/3rd turn increments.  The handwheel had a three spoke design, so that I could attach the bungie hook on three different locations.

That is sort of funny to me, since I did a similar thing with the ridgid planer this one replaced.  All was fine, with the bungee in place, a bit of a PITA, but once I was used to it, it was no big deal.
Reply
#14
  Re: Jet Planer questions by nodima (Just acquired a whit...)
Doesn't that Jet planner have cutter head or table locks?
I long for the days when Coke was a soft drink, and Black and Decker was a quality tool.
Happiness is a snipe free planer
Reply


Forum Jump:


Users browsing this thread:

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.