Looking for an elbow
#9
I am looking for a 90* plastic elbow. 

BUT...… I need it to have a female 2.25" end and a 2.25" male end.  


Both ends need to have the slight taper for a shop vac hose.


So far I've only found 2.5" elbows for dust collection hose.


Any suggestions are welcome.
My .02
Karl




Reply
#10
Rockler makes a 2.5" to 2.25" adapter:  https://www.rockler.com/rockler-2-1-2-to...gKU-_D_BwE

Just $8.00.
No animals were injured or killed in the production of this post.
Reply
#11
(05-13-2020, 10:38 AM)measure once cut remeasure Wrote: I am looking for a 90* plastic elbow. 

BUT...… I need it to have a female 2.25" end and a 2.25" male end.  

I've got clear plastic elbows on one of my router tables. I'll ck the size and try to remember where I got them.
Steve

Missouri






 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#12
Item 9 on this list at Incra is what you're looking for. $4 + shipping. They sold one to me--the only item on the order and didn't charge extra for a minimum purchase.

g

[Image: PC-WONDERFENCE_body1_v3.png]
I've only had one...in dog beers.

"You can see the stars and still not see the light"
The Eagles: Already Gone
Reply
#13

Cool  Looks like that's right on the money there.

Mine is a male/female 90 elbow but in 2-1/2" size.
Steve

Missouri






 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#14
(05-13-2020, 11:29 AM)shoottmx Wrote: Item 9 on this list at Incra is what you're looking for. $4 + shipping. They sold one to me--the only item on the order and didn't charge extra for a minimum purchase.

g

[Image: PC-WONDERFENCE_body1_v3.png]


Thanks everyone for your input.


I think I found the same part from Oneida air systems #  AHA000004

I just ordered a track system from incra less than 2 weeks ago.  Shipping was quite timely, so I may go that route again.  

Oneida air is closer, but being in upstate NY they could be shutdown as a nonessential business.
My .02
Karl




Reply
#15
(05-13-2020, 10:38 AM)measure once cut remeasure Wrote: I am looking for a 90* plastic elbow. 

BUT...… I need it to have a female 2.25" end and a 2.25" male end.  


Both ends need to have the slight taper for a shop vac hose.


So far I've only found 2.5" elbows for dust collection hose.


Any suggestions are welcome.

Put tape either inside or outside of the mating surface.
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification.  Thank You Everyone.

It is always the right time, to do the right thing.
Reply
#16
(05-13-2020, 01:49 PM)measure once cut remeasure Wrote: Thanks everyone for your input.


I think I found the same part from Oneida air systems #  AHA000004

I just ordered a track system from incra less than 2 weeks ago.  Shipping was quite timely, so I may go that route again.  

Oneida air is closer, but being in upstate NY they could be shutdown as a nonessential business.

Incra would easily be my choice - I've had great customer experiences there! Maybe Oneida is just as good, just never dealt with them.

Good luck,

Doug
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.