shop vac wye for router table
#5
Looking to split my fein vac to use for my router table.  One for under and one at the fence.  Under the table the port is 2-1/2" and around 1-1/4 on the fence I think.  Any suggestions for a wye
Reply
#6
1 1/4" is pretty small on the fence.   Typically they are 2 1/2" . 

At any rate, I think your Fein is going to have trouble keeping up with two ports simultaneously on a router table.

If you wanna have a go though:
https://www.ptreeusa.com/dust_index.html

- or -

https://www.highlandwoodworking.com/dust...spx?page=3
Reply
#7
I do all my router collection via a box surrounding the router. As long as things are sealed up well, it gets most everything, even edge profiles.
Reply
#8
Increase your fence fitting to 2-1/2, then attach a Y https://www.ptreeusa.com/dust_Y.html on the bottom side, then add a hose to the fence.
You can vary that hookup.
Steve

Missouri






 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.