07-22-2020, 03:48 PM
I'm going to nail down (cleats) 3/4 TIG red oak directly on top of the existing pine, which itself is nailed on diagonal subfloor (old house). Is rosin paper necessary or worth the minimal bother?
nail down hardwood floor install
|
07-22-2020, 03:48 PM
I'm going to nail down (cleats) 3/4 TIG red oak directly on top of the existing pine, which itself is nailed on diagonal subfloor (old house). Is rosin paper necessary or worth the minimal bother?
07-22-2020, 05:32 PM
In my opinion, yes - unless you like floors that squeak.
Know Guns. Know Security. Know Freedom - - - No Guns. No Security. No Freedom
Guns are supposed to be dangerous. If yours is not dangerous you need to take it to a gunsmith and have it repaired.
07-22-2020, 05:59 PM
07-22-2020, 09:49 PM
(07-22-2020, 05:59 PM)KC Wrote: That was my concern. If they don't squeak now, would I expect the new to? I guess it's cheap insurance. On the one hand the "old" floor should be less likely to squeak since you will be adding additional nails to (through?) it. On the other hand the squeak will most likely occur BETWEEN the old floor and the new floor - - unless you put some kind of "anti-squeak stuff" between them . . . like rosin paper.
Know Guns. Know Security. Know Freedom - - - No Guns. No Security. No Freedom
Guns are supposed to be dangerous. If yours is not dangerous you need to take it to a gunsmith and have it repaired.
07-23-2020, 05:05 PM
(This post was last modified: 07-23-2020, 05:07 PM by Snipe Hunter.)
Yes
I use 15# roofing felt. Quieter and cheap. Hardwood floors expand in the summer and shrink in the winter. So the boards loosen over time. Rosin paper or roof felt help marginalize the squeaks.
07-23-2020, 05:49 PM
(07-23-2020, 05:05 PM)Snipe Hunter Wrote: Yes +1 Most use roof felt around here also.
Steve
Mo. I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24 The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints WaterlooMark 02/9/2020
07-23-2020, 06:05 PM
That pine floor is probably worth good money. Sure you want to cover it up?
Carolyn
Trip Blog for Twelve Countries: [url=http://www.woodworkingtraveler.wordpress.com[/url] "It's good to know, but it's better to understand." Auze Jackson
07-23-2020, 06:51 PM
In my house someone nailed down some 3/8 thick skinny flooring over the original floor (which was pine) This prevented one from having a rug in-front of the entry doors. I took it down to the sub-floor, laid paper and put in ash floors that I milled up.
Captain Kirk was talking about my shop when he said: Space the final frontier!
07-23-2020, 07:53 PM
(07-23-2020, 06:05 PM)MsNomer Wrote: That pine floor is probably worth good money. Sure you want to cover it up? There's a place in Baltimore that sells reclaimed architectural odds and ends. It's amazing what they can get for old growth southern yellow pine floors... nail holes and all. There's a waiting list for it. I see it in some of the old homes I inspect, pretty stuff. I also see a good bit of American Chestnut logs and timbers used as beams and floor joists. Same with barn timbers although they're almost gone now. The Mennonites will take down a dilapidated barn built with chestnut timbers and build a new barn in it's place with White Oak timbers and metal roof and siding and no money changes hands.
07-24-2020, 05:10 AM
|
|
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.