ONE ROVER SET LEFT: BAD DOG Biter (Nibbler) & Rover (Forstner) Bits
#4
   
   
   
   
   
    e-mail & PayPal: 
CPA@taxmancpa.com

Note: Bad Dog has lifetime warranty on these. Bits dull? they will sharpen or replace.

Biter (Nibbler)

Double headed Biter body With 2 short heads, extra blade, service tool, and metal case - $50 (retail $170, on sale @ Bad Dog $110)


These are excellent multi material nibblers powered by electric drill

details: https://baddogtools.com/biter-3/


ROVER ( Advanced Forstner) BITS:

Per Bad Dog:

ROVER BITS
360° Cutting and Drilling
Combining the best qualities of forstner, auger, and spade bits, patented Rover Bits drill vertically and cut horizontally on a powerful 6″ shank. Rover Bits don’t rip up material, leaving a clean, finished flat-bottom hole. These bits were made for wood but can also power through plaster, solid surface, and even carbon fiber.


3 sets:

1. 8 bit set, 1/4" - 1-1/8" by 1/8ths. 2 bits unused, 4 in excellent shape, 2 excellent cutting with light rust on shaft. $85  (Retail $170, on sale $110)

2. 6 bit set. Sizes 1/4 through 7/8 by 1/8ths . Note cutting surfaces in good condition, the shafts have light surface rust - see pics. 6 piece total $50

3. Three pc Large Rover Bits: 1-7/8", 2", & 2-1/8." one unused, other 2 in very good condition. All three for $70 (No longer available from BD)

Each with metal storage cases.

Any should fit in a med flat rate box (Approx $17 w/ insurance)

Details: https://baddogtools.com/rover-bits/

Will cheerfully discuss any reasonable offers. Don't hesitate to ask details or better pics.

Located near Ft. Lauderdale, FL. Will gladly ship with your preferred method.
Reply
#5
Taxman,
PM sent.

Mahalo!
Earl
Reply
#6
(12-21-2020, 07:28 PM)taxman Wrote: e-mail & PayPal: CPA@taxmancpa.com

Thanks for all the responses!

Last set available:

ROVER ( Advanced Forstner) BITS:

6 bit set. Sizes 1/4 through 7/8 by 1/8ths . Note cutting surfaces in good condition, the shafts have light surface rust - see pics. 6 piece total $50

 with metal storage case.

Shipping: $9 without metal case, $17 with case.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.