Wood Insert for Hardwood
#9
I am working on a project which will need wood inserts
I am not familiar with wood insert , looking for some help

I would like to use 5/16 thread size insert which will go into Red oak.

1st I looked in to this but realize these are for soft wood.

Soft wood

Then looked for Hard wood and found these, which are brass.

Hardwood

Brass is soft material, will these work in Red oak ? any other options ?

Thanks
Reply
#10
https://conceptthirteen.ca/collections/rampa-inserts
Reply
#11
I have used the brass inserts several times.  Getting them to start straight can be tricky.  The "gizmo" they sell for installing, is well worth the money.
"I tried being reasonable..........I didn't like it." Clint Eastwood
Reply
#12
I’ve used brass in hardwoods.
You have to drill a proper sized pilot.
There are several ways to drive the inserts in straight; I used a drill press on some and a ratchet on others.
Gary

Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Reply
#13
(03-04-2023, 04:48 PM)Jack01 Wrote: I am working on a project which will need wood inserts
I am not familiar with wood insert , looking for some help

I would like to use 5/16 thread size insert which will go into Red oak.

1st I looked in to this but realize these are for soft wood.

Soft wood

Then looked for Hard wood and found these, which are brass.

Hardwood

Brass is soft material, will these work in Red oak ? any other options ?

Thanks

This is what I use:
https://www.amazon.com/Threaded-Insert-N...rp_0_124_t
"There is no such thing as stupid questions, just stupid people"
Reply
#14
I made a block from a piece of scrap 2x4. Drill a hole for the size insert desired. Second through hole for a matching bolt. Run the bolt down and double nut it. Thread the insert onto the bolt snug to the double nut. Place over a pre drilled hole and use a ratchet to drive it in.
Roger


Life isn't like a box of chocolates. It's more like a jar of Jalapenos. What you do today, might burn your rear tomorrow.

9-11 Never forget
Reply
#15
(03-05-2023, 03:03 PM)CARYinWA Wrote: This is what I use:
https://www.amazon.com/Threaded-Insert-N...rp_0_124_t

Thanks Carry

I got these from Amazon and they work great.
Reply
#16
I have had some luck with waxing the insert threads for hardwood. There is an argument that anything making them easier to screw in would also make them easier to back out. But in practice, I haven't had any back out on my high use rifle racks made of hard maple. It was hard enough to get them in there even with the wax; I doubt they are coming out any time soon.
Math is tough. Let's go shopping!
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.