Posts: 89
Threads: 0
Joined: Sep 2019
UFO shaped maple hollow form. Cracks filled with black Starbond CA glue and voids filled with copper colored resin. Finished with lacquer. The hollow form measures just over 13in wide by 3.75in tall featuring a 3.25in opening.
Posts: 21,254
Threads: 2
Joined: Mar 2009
Location: IA
I like how you finished the top.
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 27,512
Threads: 0
Joined: Jul 2002
Location: Pacific ocean now much further away!
Made lots of those. Hardest parts were under the top and the middle of the bottom. I started out with the gooseneck tool and hated it. Got a McNaughton hollower and it was much easier!
VH07V
