Login

bandit571 · (This post was last modified: 07-09-2025, 10:12 PM by bandit571.)

Second corner...needed a bit of clean up..

Filename: July Project, Dovetail 2, checked for square .jpg
Size: 202.41 KB
07-09-2025, 10:01 PM

Once I checked it for square...

Filename: July Project, Dovetail 2, bit of clean up .jpg
Size: 186.99 KB
07-09-2025, 10:02 PM

So..now the back corners are now done...

Filename: July Project, Dovetail 2, 3 sides done .jpg
Size: 149.16 KB
07-09-2025, 10:04 PM

So, what is next up?

Filename: July Project, Next items, Lid .jpg
Size: 178.9 KB
07-09-2025, 10:05 PM

It will involve these 3 items...The "Front" will be trimmed for length, and then attached via through dovetails...
The Top?

Filename: July Project, Next Items, needs trimmed down .jpg
Size: 183.65 KB
07-09-2025, 10:07 PM

Also needs to be trimmed down a bit...and a rebate milled on each end, and along the "back edge"..

Filename: July Project, Next Items, needs a rebate .png
Size: 547.05 KB
07-09-2025, 10:09 PM

So it can sit in a groove along the back and the 2 sides...so that it sits flush with the top edges...

Then see about how to attach that lid...
Stay tuned..

Login
	Lost Email?
Password:	Lost Password?
	Remember me

*If you are unable to login and cannot reset your password, the fastest way to contact us is by creating a temporary account and sending a pm to the sysadmin account.