Tite-Marks and Veritas Wheel Marking Gauges - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: Tite-Marks and Veritas Wheel Marking Gauges (/showthread.php?tid=7173313) |
Tite-Marks and Veritas Wheel Marking Gauges - RonL - 12-21-2015 I recently took a dovetail class and got to use one of the Tite_Marks marking gages. Its just a lot better that my shop fox and cuts very nicely. My question has anyone used the Veritas Wheel gages. Lets face it they are a lot cheaper, but do they work as good. Anyone have experience with both. RonL Re: Tite-Marks and Veritas Wheel Marking Gauges - Anji12305 - 12-21-2015 Buy a Titemark from Lee Valley tools. Get a Veritas version at the same time. Keep the one you like best, return the other. Re: Tite-Marks and Veritas Wheel Marking Gauges - Mike Brady - 12-21-2015 I have both and prefer the Tite-Mark. The barrel adjuster is just fantastic. I do have one stainless steel Veritas gauge that I like for small work. It has two marking heads and is a copy of one that Stanley made back in the day. The Veritas one is no longer made. Re: Tite-Marks and Veritas Wheel Marking Gauges - SCMedLion - 12-21-2015 I was given a Veritas wheel gauge, and I already had a Tite-Mark. It is very handy to have at least two gauges set to differing needs during a project. I will say that I don't feel like the Veritas thumbscrew is quite as snug, but I haven't experienced a failure to hold. The Veritas gauge I have is not the micro-adjust model. Since my Tite-mark has the two screws it just seems more secure. Perhaps the Veritas micro-adjust model would be equally so. Either way, if funds are the main concern, the Veritas is a good tool, better than the pin gauges I had long ago. Re: Tite-Marks and Veritas Wheel Marking Gauges - Roger A - 12-21-2015 I love my Veritas wheel marking guage. Never had a problem with the setting slipping. Also have the dual marking guage for mortices. Yep, work well, and the plain marking guage is not expensive. Roger Re: Tite-Marks and Veritas Wheel Marking Gauges - Steve N - 12-21-2015 I've had both a long, and a short TiteMark before LV sold a good gauge. I know I can depend on them, every time, not sure about price, but I never felt cheated, and likely I paid more than you will now that there is competition. Re: Tite-Marks and Veritas Wheel Marking Gauges - Handplanesandmore - 12-21-2015 The Veritas marking gauge is a steal and if value (money and tool quality taken into consideration as a whole) is your prime concern, the Veritas is hands down the best deal. Simon Re: Tite-Marks and Veritas Wheel Marking Gauges - AHill - 12-21-2015 I have both and I much prefer the Tite-Mark. It has the micro adjust and it just feels more substantial (it's heavier). The Veritas is very nice, don't get me wrong. Just my personal preference. Re: Tite-Marks and Veritas Wheel Marking Gauges - RonB1957 - 12-21-2015 I use my Veritas all the time. It's the one with the markings but with out the fine adjustment. Once again, a great bang for the buck. Re: Tite-Marks and Veritas Wheel Marking Gauges - Tony Z - 12-21-2015 I've had both and much prefer the Tite-Mark. Since we're talking gauges, for a great budget gauge, take a look at the LV 3 in 1 brass gauge. My favorite gauge is a Hamilton. |