+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: is this an edge sander? (/showthread.php?tid=7336483)
is this an edge sander? - norm_ahram - 01-16-2018
It was just sold, but had been available for a while. I had an opportunity to check it out, and purchase it, but I procrastinated.
It looks like a floor model edge sander, and these typically cost $700 to $800 for non-oscillating ones.
It's listed as a Grizzly Table belt sander - 36x6" - $250
RE: is this an edge sander? - Arlin Eastman - 01-16-2018
First welcome.
That looks bigger then 36" and even bigger then my 48".
It does look like an edge sander and it also looks like you missed out on a good deal.
Here is one from grizzly that looks the same.
http://www.grizzly.com/products/Edge-Sander-w-Wrap-Around-Table/G0512?utm_campaign=zPage&utm_source=grizzly.com
Or this one most likely
http://www.grizzly.com/products/6-x-80-Floor-Model-Edge-Sander/G1140?utm_campaign=zPage&utm_source=grizzly.com
RE: is this an edge sander? - woodhead - 01-16-2018
I don't see a fence??? Not an edge sander without a fence!
Al
RE: is this an edge sander? - Stwood_ - 01-16-2018
Yes, it is an edge sander. Sanding head/unit is shown folded down. I don't see the table....should be with it.
RE: is this an edge sander? - greatscott - 01-17-2018
It was originally an edge sander and I guess can still be considered an edge sander. Either the same sander (or an identical one) was up for sale in Arizona a few months ago. The seller did not have the rest of the edge sander parts (he was the 2nd owner).
RE: is this an edge sander? - kscott - 01-17-2018
(01-16-2018, 02:49 PM)norm_ahram Wrote: It was just sold, but had been available for a while. I had an opportunity to check it out, and purchase it, but I procrastinated.
It looks like a floor model edge sander, and these typically cost $700 to $800 for non-oscillating ones.
It's listed as a Grizzly Table belt sander - 36x6" - $250
Looks like mine. The belt is 80 inches. If you measure the thing from end to end it is probably 36" (not in the shop now). While they don't come up too often the 250 isn't that great a price. I got mine for $150 and the guy threw in 8 belts.
Ken
RE: is this an edge sander? - KC - 01-18-2018
Without bothering to look at the Grizzly site, I think that's a big belt sander. I had the edge sander and the table was what tilted, not the sanding portion.
RE: is this an edge sander? - Greg Jones - 01-18-2018
I believe it is the G1140 6x80 edge sander (the second link Arlin posted to above), which can be converted to be used as a belt sander.
RE: is this an edge sander? - Stwood_ - 01-18-2018
(01-18-2018, 05:59 AM)KC Wrote: Without bothering to look at the Grizzly site, I think that's a big belt sander. I had the edge sander and the table was what tilted, not the sanding portion.
My 6x89 Jet is an *edge* sander, and folds down just like that Grizzly is shown, to be used as a table sander.
RE: is this an edge sander? - KC - 01-19-2018
(01-18-2018, 10:56 AM)Stwood_ Wrote: My 6x89 Jet is an *edge* sander, and folds down just like that Grizzly is shown, to be used as a table sander.
All righty then.
