(01-22-2018, 01:08 AM)MidwestMan Wrote: These days, I like making bowls. Also... personally, I like seeing the pith in the bowl.. or on the rim... cracks and all don't bother me... I like it... the way I see, it gives the bowl character.

However, I had a nice hunk of pear wood, that was cracking badly near the rim... so, I optioned to inlay crushed stone, in the part that had "key" cracking. I didn't take a photo beforehand, I wish I had now, because perhaps someone else can learn something from this posting.

 At any rate, over at "Michaels", you can buy 28 ounces of crushed stone for 4 bucks. Or, of course, you can spend 11 or 12 bucks and buy 1.1 ounces of "Turners Select Crushed Stone Magnesite" at Craft Supplies. However, I did need to use the carbide cutter to turn down the stone from Michaels.

Here is the result. The first photo is closer to the actual color. 9½ rim x 4 3/4 Height.

(01-23-2018, 12:29 AM)Angus Wrote: Just a word of caution. The expensive stuff (inlace) sold by craft supplies or packard can be turned with HSS tools. All the stuff I've seen at Michaels is REAL crushed stone and will kill HSS.