Woodnet Forums
Lathe Lighting - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Lathe Lighting (/showthread.php?tid=7339247)

Pages: 1 2 3

Lathe Lighting - jcredding - 04-29-2018

Trying to get better light at the lathe and didn’t see a discussion about it when searching. Right now, have the shop overheads throughout (8 4’ fixtures in 1000 sq ft shop) and am going to put one more over the lathe. Was also thinking it would be nice to have something that I can use closer to the work piece since the vision isn’t what it used to be (getting old sucks . . . but beats the alternative). Curious what people use to light the workpiece.

Thanks, John

RE: Lathe Lighting - FrankAtl - 04-29-2018

I just installed a 4’ LED alight over the lathe. Works great.

RE: Lathe Lighting - MichaelMouse - 04-29-2018

(04-29-2018, 08:57 AM)jcredding Wrote: Trying to get better light at the lathe and didn’t see a discussion about it when searching.  Right now, have the shop overheads throughout (8 4’ fixtures in 1000 sq ft shop) and am going to put one more over the lathe.  Was also thinking it would be nice to have something that I can use closer to the work piece since the vision isn’t what it used to be (getting old sucks . . . but beats the alternative).  Curious what people use to light the workpiece.

Thanks, John

Overhead is fine, but a highly directional and aimed flood is really an asset for seeing the edge of the wood in a "ghost" rough piece, and illuminating the interior of open forms.  I use clip floods - cheap and effective .  I have changed to LED lights so a carelessly neglected elbow won't get burned so easily.  

Turner's head has a tendency to interfere with overhead for the uses mentioned.

RE: Lathe Lighting - sniper - 04-29-2018

I've got the KJR Aurora LED Lathe Lamp

https://www.woodturnerscatalog.com/p/90/6268/KJR-Aurora-LED-Lathe-Lamp?term=led+work+lamp

I love it and have a second one on my wish list because sometimes you can't have too much light.

Of course, I've got a quad 4' LED tube fixture over the lathe.

RE: Lathe Lighting - DFJarvie - 04-29-2018

I have a 4ft fluorescent strip and 4 track lights over the lathe.

RE: Lathe Lighting - Arlin Eastman - 04-29-2018

John

I use a desk lamp almost like this

https://www.lightingdirect.com/globe-electric-5698601-architect-1-boom-arm-desk-lamp/p2664103

But this one is cheaper and mine is not working after 5 years so I will get this one or another like it.  $20 is pretty cheap and I use a 100w LED in it.

RE: Lathe Lighting - daddo - 04-30-2018

Nothing beats these with natural 75-100w bulbs that can be moved anywhere around the lathe or use three of them at the same time.

You can make a bar across the rear and above the lathe to position them in any direction.

 I don't know why so many folks don't want to use them. Maybe they think they aren't "In style".
Laugh

 But I have no dark spots or shadows using two or more of them, and they don't shine into my eyes.


[Image: 410mNADp05L._AC_US327_QL65_.jpg]

RE: Lathe Lighting - FrankAtl - 04-30-2018

(04-30-2018, 08:58 AM)daddo Wrote: Nothing beats these with natural 75-100w bulbs that can be moved anywhere around the lathe or use three of them at the same time.

You can make a bar across the rear and above the lathe to position them in any direction.

 I don't know why so many folks don't want to use them. Maybe they think they aren't "In style".
Laugh

 But I have no dark spots or shadows using two or more of them, and they don't shine into my eyes.


[Image: 410mNADp05L._AC_US327_QL65_.jpg]

I have one of these in addition to the overhead LED.

RE: Lathe Lighting - hairy - 04-30-2018

(04-29-2018, 08:57 AM)jcredding Wrote: Trying to get better light at the lathe and didn’t see a discussion about it when searching.  Right now, have the shop overheads throughout (8 4’ fixtures in 1000 sq ft shop) and am going to put one more over the lathe.  Was also thinking it would be nice to have something that I can use closer to the work piece since the vision isn’t what it used to be (getting old sucks . . . but beats the alternative).  Curious what people use to light the workpiece.

Thanks, John

I have three 4' fluorescents overhead, and a tripod light to see inside. $3 at a yard sale.

RE: Lathe Lighting - Arlin Eastman - 04-30-2018

Hairy

I like that floor model but would not work with me since it is 30" from the wall