Lie Nielsen planes. Last 3 reduced!! - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: Lie Nielsen planes. Last 3 reduced!! (/showthread.php?tid=7343518) Pages:
1
2
|
RE: Lie Nielsen planes. Added 1 more - mainframe - 10-15-2018 (10-15-2018, 10:35 AM)Admiral Wrote: I just happened to have a Highland Hardware catalog from 2005, and back then, LN made a "Rip Carcass" at 14pt, and a "Coarse Rip Carcass" at 12pt both with an 11 inch long plate. The spine on this saw is stamped "12" so it is clearly this version of the Coarse Rip Carcass and not some b@stardized refile by Cosman. Thanks guys for clarification. Chris RE: Lie Nielsen planes. Last 3 reduced!! - alanealane - 10-15-2018 Would the 12pt saw be good for handcut dovetails? RE: Lie Nielsen planes. Last 3 reduced!! - mainframe - 10-15-2018 (10-15-2018, 09:25 PM)alanealane Wrote: Would the 12pt saw be good for handcut dovetails? Pretty sure that's why I bought it, but I'll commit to strong maybe. Perhaps AHill or Admiral can chime in. RE: Lie Nielsen planes. Last 3 reduced!! - WoodTinker - 10-16-2018 (10-15-2018, 09:25 PM)alanealane Wrote: Would the 12pt saw be good for handcut dovetails? I am not an expert. Depends on your material. The "Chris Schwarz" rule is to have at least 3 teeth in your material while sawing. Looks like 1/4 inch minimum in this case. RE: Lie Nielsen planes. Last 3 reduced!! - MattRadtke - 10-16-2018 (10-08-2018, 12:53 PM)mainframe Wrote: The LN 4 Bronze is SOLD. Received both today. Clearly well cared for, well packed. Sharpened both and put them in their spot in my tool chest. Thanks! RE: Lie Nielsen planes. Last 3 reduced!! - mainframe - 10-17-2018 Good to hear Matt. RE: Lie Nielsen planes. Last 3 reduced!! - alanealane - 10-17-2018 Very happy with the chisel plane in case I forgot to mention |