+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Overhead drum sanders (/showthread.php?tid=7345288)
Pages:
1
2
Overhead drum sanders - DaveBozeman - 12-28-2018
I have an old Ryobi 16" drum sander. It works well.. mostly.
I'd like to get a bigger sander, that has perfected or at least improved the way the sanding belts are put on and tightened. This one will come lose at very inopportune times and then burn the wood.
Looking for a 22"/44", or that range, either 110v or 220v.. I have both ready for it
Any sanders people would recommend I look at?
tia.. Dave
RE: Overhead drum sanders - fredhargis - 12-28-2018
Supermax. I just bought one (19/38) to replace a Delta I sold quite a few years ago, and really like the features it has. It is now made in Taiwan (
) but still seems to be well built. I tried to get in before they switched to Asian manufacturer, but missed it by about 6 months.
RE: Overhead drum sanders - DaveBozeman - 12-28-2018
How do you like the system for holding the belts? Do they slip often?
RE: Overhead drum sanders - fredhargis - 12-29-2018
Understand I haven't used mine a great deal (yet) but so far they seem to work very well. They are also a little easier to get to than the ones on my old Delta. I've only changed the belts twice, but no problems so far.
RE: Overhead drum sanders - Kansas City Fireslayer - 12-29-2018
I have a 37” dual drum Supermax and changing the paper is a breeze. I would of bought a new 19/38 Supermax if I hadn’t found this lightly used 37x2 machine. If you do any research among the forums, you’ll find many happy Supermax users. I think parts will be readily available for many years to come as well.
RE: Overhead drum sanders - Tony Z - 12-29-2018
I have a 16/32 Performax and a General 25" dual drum sander. I would not buy the General again-way, way too fussy to get adjusted when changing to different brands & grits of paper. Changing the paper is not bad, but the machine is fussy-a wisker too much one way or the other, and you're screwed. I have basically resigned myself to only using paper on one drum.
I was going to go dual drum Supermax, and I now regret not doing so.
RE: Overhead drum sanders - rayknight - 12-29-2018
Have a 24" grizzly,dual drum, bought used for $600, had the spiral wound with clips to hold paper, drove me crazy with slipping, tearing and burning, converted to hook and loop and couldn't be happier, paper stays put in place, no tears, no burning.
would emphasize that you go slow, no more than 1/8 to 1/4 turn per pass and two passes at each setting, better results, paper never burns and lasts longer. of course your experience may vary.
Ray
RE: Overhead drum sanders - DaveBozeman - 12-29-2018
there's a way to use hook and loop on the drums?
RE: Overhead drum sanders - ez-duzit - 12-29-2018
Pretty happy with the Performax 22/44. But the big Supermax dual drum would be a great choice.
RE: Overhead drum sanders - lift mechanic - 12-29-2018
Grizzly sells a hook and loop kit for there 24" dual drum sander. I converted mine several years ago. Very happy with it. I use string packaging tape to hold down the ends of the sand paper, so I loose about 1" of the width.