1 hour Project - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: 1 hour Project (/showthread.php?tid=7347006) |
1 hour Project - bandit571 - 03-12-2019 Found a use for a bit of the Pine leftovers....1 x 8 as a shelf, and a 1 x 6 to make a couple "legs" for the shelf to stand on.. Spent half the time going between the Kitchen, and the shop....so.... [attachment=17267] back side of the shelf needed a notch cut. To fit around a window sill/ledge/stool Simple three countersink screws to attach the legs... legs got a bit curvy.... [attachment=17268] then I found out I needed to notch for the backsplash.....haul it to the shop, backsaw to make one crosscut, mallet and chisel to pop the waste off...and back upstairs to check the fits... [attachment=17269] One more test fit...needed to remove a saw blade's with at the back, so things fit better around the shelf....will let the Boss paint this the colour she wants... 6 screws, a bead or two of glue....and a few scraps of pine. I think that will do for today.. RE: 1 hour Project - bandit571 - 03-14-2019 Have a few other "1 Hour" projects to do....some to use up the scraps, some for around the house projects. IF there is any interest, I may post those here. RE: 1 hour Project - Grandpa Dave - 03-14-2019 (03-14-2019, 09:29 AM)bandit571 Wrote: Have a few other "1 Hour" projects to do....some to use up the scraps, some for around the house projects. Yep...post away...lets me know you're OK |