+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: How to cut dados for a bookcase? (/showthread.php?tid=7351468)
How to cut dados for a bookcase? - overland - 11-27-2019
I'm making a bookcase. What's a good way to cut dados for the shelves in the side pieces?
RE: How to cut dados for a bookcase? - John Mihich - 11-27-2019
(11-27-2019, 01:51 PM)overland Wrote: I'm making a bookcase. What's a good way to cut dados for the shelves in the side pieces?
Router. Make a jig that the router can follow. Do a google search and you should find one that the router will ride in and be clamped on. There all sorts of ways to use the router but I have found the ones where the router has to follow a jig is the best. he jig can be simple 1/4" plywood with sides that the router has to follow - on both sides - the router can't wander then.
RE: How to cut dados for a bookcase? - meackerman - 11-27-2019
(11-27-2019, 01:59 PM)John Mihich Wrote: on both sides - the router can't wander then.
yup. found out the hard way the router will wander if not contained on both sides.
RE: How to cut dados for a bookcase? - DaveR1 - 11-27-2019
When you do this, temporarily tack the sides together so you can cut counterpart dadoes in both pieces at the same time so you know they align correctly.
RE: How to cut dados for a bookcase? - R Clark - 11-27-2019
A router is how I'd do it. Presuming this is a standard bookcase with sides that mirror each other lay them next to each other, back edges matched up, and cut both sides in the same pass with the same jig/straightedge/cut guide device.
RE: How to cut dados for a bookcase? - Allen - 11-27-2019
(11-27-2019, 01:51 PM)overland Wrote: I'm making a bookcase. What's a good way to cut dados for the shelves in the side pieces?
https://www.youtube.com/watch?v=ycp9fDPO4SU
RE: How to cut dados for a bookcase? - overland - 11-27-2019
Thanks, everyone, for all the good advice.
RE: How to cut dados for a bookcase? - Stwood_ - 11-27-2019
Router is fine, though I always use a dado head in a table saw with a sled.
RE: How to cut dados for a bookcase? - meackerman - 11-27-2019
I prefer to make the jig work with a dado cleanout router bit....something like this: https://www.woodline.com/products/dado-cleaners
you set the jig for the exact width of the shelf, clamp it where you want the dado, run the router through the jig and done.
by using a dado cleanout router bit, there's no offset, no measuring. you set the jig for the exact thickness of the shelf....which means any sanding of the shelf should be done first....and it just fits.
RE: How to cut dados for a bookcase? - cputnam - 11-27-2019
If you do not like the idea of a router an all the fussing with jig making, use a dado plane. Clamp a fence, align the cutter, and a few strokes later, voila, a dado.
