+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Dutch tool chests - do you still love them (/showthread.php?tid=7354315)
RE: Dutch tool chests - do you still love them - stav - 04-08-2020
Rob's tool chest is very inventive but a bit more complicated than I want to try to ts Klein at the moment. Besides, I don't have any ply.
RE: Dutch tool chests - do you still love them - overland - 04-09-2020
Is there a plan somewhere for a smaller, more portable Dutch Tool Chest? I thought I once saw one.
RE: Dutch tool chests - do you still love them - C. in Indy - 04-09-2020
(04-09-2020, 09:58 AM)overland Wrote: Is there a plan somewhere for a smaller, more portable Dutch Tool Chest? I thought I once saw one.
Yes, strike the Dutch and add the Viking
[attachment=25870]
RE: Dutch tool chests - do you still love them - stav - 04-09-2020
Viking tools needs appear to be a little more spartan than my own. I’d need a few of those for the little bit that I have.
RE: Dutch tool chests - do you still love them - paul2004 - 04-09-2020
I have not read the entire thread.. but Stav, have you thought about buying or making something like this:
https://www.uline.com/Product/Detail/H-7161/Tool-Storage/Rolling-Toolbox?pricode=WB6676&gadtype=pla&id=H-7161&gclid=EAIaIQobChMI2-qEsfDb6AIVx_fjBx0kOANLEAQYAyABEgLU6vD_BwE&gclsrc=aw.ds
RE: Dutch tool chests - do you still love them - Rob Young - 04-09-2020
(04-09-2020, 09:58 AM)overland Wrote: Is there a plan somewhere for a smaller, more portable Dutch Tool Chest? I thought I once saw one.
Design scales pretty well up and down. The one C.S. published was based on two things as I recall. Depth was width of boards commonly available from home center. Width & height based on things to store.
I've helped a lot of people build these and if building from something other than pine, say poplar, consider thinning the material to 5/8" as it will reduce the weight and help compensate for the increase in weight between poplar and white-pine. I believe the back boards can be reduced to 1/2" with no issues in any material.
Mine is a mix of white pine and a few yellow pine boards. Started from BORG stock and it got thinned out to flatten various parts. No issues for me.
But I should at some point swap out the screws that hold the handles on the side for bolts that go through with a nice washer on the inside. Mine doesn't get lifted much so pretty low priority.
RE: Dutch tool chests - do you still love them - stav - 04-09-2020
Paul, I haven't looked at that specific chest, but I did find a Platt Guardsman on Craigslist really cheap ($25). I bought it thinking I could outfit the inside to hold the bulk of my tools. I realized it will take a lot of configuring that to make it work and then it still won't be able to hold everything. Purpose built seems like the best option.
I may still try to outfit the Platt for some things, even though my jointer plane is not going to fit.
RE: Dutch tool chests - do you still love them - Admiral - 04-09-2020
(04-09-2020, 07:35 PM)stav Wrote: Paul, I haven't looked at that specific chest, but I did find a Platt Guardsman on Craigslist really cheap ($25). I bought it thinking I could outfit the inside to hold the bulk of my tools. I realized it will take a lot of configuring that to make it work and then it still won't be able to hold everything. Purpose built seems like the best option.
I may still try to outfit the Platt for some things, even though my jointer plane is not going to fit.
I have something very, very similar; they were throwing it out at work, so I snagged it; its lined with foam as it was used to ship electronics internationally, so I'd have to rip that out and configure, a lot of work...
RE: Dutch tool chests - do you still love them - bandit571 - 04-15-2020
1911 James Swan Company catalog lists 3 tool chests, complete with tools, and...4 tool cabinets, also complete with tools....Style C had 87 tools..$60.00
length=32inches, width = 18 inches, depth = 16 inches, "Superior Mechanics Tool Chest" print on the inside of the lid.
RE: Dutch tool chests - do you still love them - Rob Young - 04-15-2020
(04-15-2020, 02:03 PM)bandit571 Wrote: 1911 James Swan Company catalog lists 3 tool chests, complete with tools, and...4 tool cabinets, also complete with tools....Style C had 87 tools..$60.00
length=32inches, width = 18 inches, depth = 16 inches, "Superior Mechanics Tool Chest" print on the inside of the lid.
Something in the vicinity of $1500 in today's dollars...