Woodnet Forums
Railing question - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Railing question (/showthread.php?tid=7354934)

Pages: 1 2


Railing question - Scouter - 04-29-2020

Continuing on with the porch railing I have to put on. I was walking downtown and looking at some buildings there when an idea hit, but I don't know if it would meet building code or if there are issues I may not be thinking about.

Instead of balusters can I use plexiglass? Would give a nice, clean look to the railing, and would allow a less obstructed view. Spacing between the posts is < 6', and height of the plexiglass would be about 2' 0" to 2' 4" (not sure about height yet).


RE: Railing question - farmerj111 - 04-29-2020

I don't know about the legality of it code wise, but I would be worried about it developing a haze or film after a summer or two.  Even if it didn't, keeping it clean might turn into a real pain.


RE: Railing question - fixtureman - 04-29-2020

(04-29-2020, 04:39 PM)Scouter Wrote: Continuing on with the porch railing I have to put on. I was walking downtown and looking at some buildings there when an idea hit, but I don't know if it would meet building code or if there are issues I may not be thinking about.

Instead of balusters can I use plexiglass? Would give a nice, clean look to the railing, and would allow a less obstructed view. Spacing between the posts is < 6', and height of the plexiglass would be about 2' 0" to 2' 4" (not sure about height yet).

Fiberon decking had a clear rail system


RE: Railing question - Scouter - 04-29-2020

(04-29-2020, 05:08 PM)fixtureman Wrote: Fiberon decking had a clear rail system

Any idea what they used for the clear section - plexiglass, glass?


RE: Railing question - jteneyck - 04-29-2020

(04-29-2020, 05:12 PM)Scouter Wrote: Any idea what they used for the clear section - plexiglass, glass?

Tempered glass can be used instead of balusters on balustrades.  The price likely will curl your eyelids though.  I'm not sure what the codes are with respect to exterior stairways, but with interior ones the top of the handrail must fall at 34 - 38" above the nose of the tread.   Also, the wind load on a big sheet of glass on an exterior stairway is going to require very heavy duty newel posts and anchoring.  

John


RE: Railing question - Scouter - 04-29-2020

(04-29-2020, 06:08 PM)jteneyck Wrote: Tempered glass can be used instead of balusters on balustrades.  The price likely will curl your eyelids though.  I'm not sure what the codes are with respect to exterior stairways, but with interior ones the top of the handrail must fall at 34 - 38" above the nose of the tread.   Also, the wind load on a big sheet of glass on an exterior stairway is going to require very heavy duty newel posts and anchoring.  

John

Apropos timing, we just had a windstorm come through. Back to the drawing board.


RE: Railing question - Scouter - 04-29-2020

(04-29-2020, 06:08 PM)jteneyck Wrote: Tempered glass can be used instead of balusters on balustrades.  The price likely will curl your eyelids though.  I'm not sure what the codes are with respect to exterior stairways, but with interior ones the top of the handrail must fall at 34 - 38" above the nose of the tread.   Also, the wind load on a big sheet of glass on an exterior stairway is going to require very heavy duty newel posts and anchoring.  

John

Wonder if this would solve the problem.

[Image: xdeck-glass-railings-panels.jpg.pagespee...jVsW7Y.jpg]


RE: Railing question - Stwood_ - 04-29-2020

I've seen tempered glass panels on decks down at the lake. 3' long then a space etc etc

Ck your codes


RE: Railing question - fixtureman - 04-30-2020

I think it was polycarbonate or Lexan


RE: Railing question - jamesglenn - 04-30-2020

Tempered glazing may be used.

The building code has a section on it and all the requirements. Stairs need a handrail and if above 30", need a guard rail up to 42".
The guard rail must withstand certain forces.