06-28-2023, 10:50 PM
I started building a Moravian bench 2 years ago. And I finally got back to it yesterday. I must say that this is the most challenging bench I have ever built. It is not for the faint hearted. A Roubo is much easier. In one of the pictures is the block that holds the vise hardware. the other is just the chop. I need to get the ends glued together so I can cut the dove tailed pieces on the end. I got the sockets done. The piece that holds the vise hardware is not yet mortised in. And the last picture is the 4 inch top I haven't decided is I am going to do a split top or put on a tool tray or a split top with a tool tray. I have a couple of boards under the stretchers that keep the end pieces off the bench top about 1/32 if an inch for easier removal and installation. One picture is the only print I have of the bench and believe me most is made to the size it is because I chose those sizes. and the print is coffee stained to boot. Since cherry is my favorite wood and I got some walnut at a very good price, the legs are walnut and the top is Ash. On the bench every thing is setting on the legs and stuff are cherry
anyway pictures,
[attachment=47687]
[attachment=47688]
[attachment=47689]
[attachment=47690]
[attachment=47691]
[attachment=47692]
[attachment=47693]
Anyway thanks for looking.
Tom
anyway pictures,
[attachment=47687]
[attachment=47688]
[attachment=47689]
[attachment=47690]
[attachment=47691]
[attachment=47692]
[attachment=47693]
Anyway thanks for looking.
Tom