#8
Bought some of those ready to install cedar closet liners from HD about a year ago.  Went out to use them today and noticed a white chalky substance on some areas of some of the boards.  I assume it is mold.  What would be the best way to get rid of it?  It looks like it's just on the outside of the board as you can wipe it off with your finger.  Something I can wipe on to do the job or should it all be sanded.  Big job either way as I have 11 boxes at 15Sq.ft. per box.  Thanks for your help.
The older I get the faster I was.
Reply

#9
Perhaps some sap/oils coming to the surface? I'd wipe it down with MS and see what happens.
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Reply

#10
(02-06-2020, 01:35 PM)Admiral Wrote: Perhaps some sap/oils coming to the surface?  I'd wipe it down with MS and see what happens.


Yes, I's say it's a dab of cedar sap. Light sanding after install
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#11
(02-06-2020, 10:03 AM)Ingjr Wrote: Bought some of those ready to install cedar closet liners from HD about a year ago.  Went out to use them today and noticed a white chalky substance on some areas of some of the boards.  I assume it is mold.  What would be the best way to get rid of it?  It looks like it's just on the outside of the board as you can wipe it off with your finger.  Something I can wipe on to do the job or should it all be sanded.  Big job either way as I have 11 boxes at 15Sq.ft. per box.  Thanks for your help.
Yup. Resin (rosin) bleeding.  That's one reason why we shellac seal conifers if we want them to hold an oil finish rather than blister it out.

Scrape or wipe with MS.
Better to follow the leader than the pack. Less to step in.
Reply

#12
(02-06-2020, 03:03 PM)MichaelMouse Wrote: Yup. Resin (rosin) bleeding.  That's one reason why we shellac seal conifers if we want them to hold an oil finish rather than blister it out.

Scrape or wipe with MS.

Thanks to everyone.  That's exactly what it was, sap.  Much better than mold I must say.  Thanks again.
The older I get the faster I was.
Reply
Cedar planking problem


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.