Posts: 6,179
Threads: 0
Joined: Dec 2002
Location: Bothell, WA
So, after learning the lesson that lenox woodmaster CT tips cannot be sharpened I'm looking for a carbide blade that can be resharpened. I've heard good things about the Resaw King. Is that the band best suited to my needs?
I'll use it for cutting some pretty hard stuff including my 9" thick Gabon ebony log, though I've learned my lesson on what to use for African blackwood.
Cellulose runs through my veins!
Posts: 9,459
Threads: 0
Joined: Dec 2004
trimaster
resaw king
both great
Send a note to BlackHawk Industrial (used to be sanders tools)
1506 Luthy Drive Peoria, IL 61615 Toll Free: (800) 397-TOOL Phone: (309) 692-2666
And see of they will sharpen your Woodmaster CT.
Glad its my shop I am responsible for - I only have to make me happy.
Posts: 6,179
Threads: 0
Joined: Dec 2002
Location: Bothell, WA
Thanks for the reference, but I took it to a local place that sharpens carbide tipped blades, but they said the teeth were toast. Carbide is no match for African blackwood.
Cellulose runs through my veins!
Posts: 115,190
Threads: 0
Joined: Jun 2002
Location: Sparkling Clearwater, Fl. Tampa Bay Area
Why can't carbide teeth be resharpened? Diamond is many times harder than tungsten carbide..I wonder if you have tried sharpening it with a 1/8" diamond burr in a Dremel?
edit....I can understand the problem if the teeth have been destroyed...but not so much if they are just dull and worn or have lost too much "set"...I think I would try sharpening it myself right on the saw, before tossing it...
Often Tested. Always Faithful. Brothers Forever
Jack Edgar, Sgt. U.S. Marines, Korea, America's Forgotten War
Get off my lawn !
Posts: 2,819
Threads: 1
Joined: Jun 2004
Location: Eagle River Alaska
Call these people. They say the can sharpen the CT band saw blade.
http://www.dailysawservice.com/
Alaskan's for Global Warming
Eagle River AK
Posts: 6,179
Threads: 0
Joined: Dec 2002
Location: Bothell, WA
It's because the woodmaster CT has teeth so small they can't be resharpened. I've heard the same from others that this is the case.
I don't have a dremel tool. I'm not all that interested in spending time trying to sharpen a 154" long band in any case. I have more money that time so new is a better choice right now.
Cellulose runs through my veins!
Posts: 115,190
Threads: 0
Joined: Jun 2002
Location: Sparkling Clearwater, Fl. Tampa Bay Area
Quote:
It's because the woodmaster CT has teeth so small they can't be resharpened.
That would explain it...The one I looked at {Lenox site} was 3ppi which is very doable, providing it is just dull and not damaged.
Often Tested. Always Faithful. Brothers Forever
Jack Edgar, Sgt. U.S. Marines, Korea, America's Forgotten War
Get off my lawn !
Posts: 605
Threads: 0
Joined: Aug 2007
Location: ex TX, now central Maine
SteveS said:
So, after learning the lesson that lenox woodmaster CT tips cannot be sharpened I'm looking for a carbide blade that can be resharpened. I've heard good things about the Resaw King. Is that the band best suited to my needs?
Resurrecting an old thread:
Steve, did you ever find someone to sharpen your CT bandsaw blades? I've been trying to find someone to resharpen my Laguna Kerf-King blades; Laguna will resharpen their Resaw King blades but not the other...
I've called Daily Saw Service that was referenced in this thread and they will sharpen CT blades, but I was curious if you had used them or how you had made out with your blades.
Thanks,
Cliff
Cliff
ex-TX, now Maine!
Posts: 6,179
Threads: 0
Joined: Dec 2002
Location: Bothell, WA
After doing a bit more research I found that the original profile on the woodmaster is a triple chip grind that no resharpening company can regrind, apparently. If you find the DSS can I'd be interested.
I've since purchased a TriMaster CT blade to replace the WM. Supposedly Laguna can resharpen that. I will only use cheap blades to cut ABW so perhaps I won't need a resharpening for a long time.
Cellulose runs through my veins!
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
Steve
This is the one a guy bought for me that ruined my other two and it is working great.
Grizzley Arlin
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.