How To? Mount a router on a Grizzly Table Saw
#5
Just set up my Grizzly G1023RLW  table saw with the router table.  The instruction booklet says to read the router table manual for router installation but there seems to be no such booklet.  
So, has anyone mounted a router to their Grizzly saw table and how?  
Thank you!!!
Reply
#6
Is this the manual you need?

http://cdn0.grizzly.com/manuals/h7507_m.pdf -- Mounting Router, Page 13

http://www.grizzly.com/products/Router-E...rizzly.com -- Manual PDF
Reply
#7
Lynden,  You are the very very best!!!!!!!
Thank you!!!!!!!
Reply
#8
Available now, and using the table insert it offers 4 different rings you can mount in the insert. You could contact both to find exact sizes of the hole diameter. Check that against any bit diameter you think you might use. One thing for sure is if it's on a table insert, you can always put in a different insert to accept virtually and diameter bit. On the Griz if you get a bit larger than their biggest hole diameter, you are s*&^^ed.
Worst thing they can do is cook ya and eat ya

GW
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.